Fak Engineering Works - Stainless Steel Copper Tube, Pipe, JIC, HOSE Fittings, Ball, Needle Valves, Cable Glands

Fak Engineering Works - Stainless Steel Copper Tube, Pipe, JIC, HOSE Fittings, Ball, Needle Valves, Cable Glands

Fak Engineering Works - Stainless Steel Copper Tube, Pipe, JIC, HOSE Fittings, Ball, Needle Valves, Cable Glands

45 TYPE 2,3 & 4 MARINE CABLE GLAND

FLANGES DIMENSION

PIPE FITTINGS DIMENSION

	BUTTWELD PIPE FITTINGS
	CONDENSATE POT COMPLETE DIMENSION
	OUTLET
	PIPE DIMENSION, WEIGHT, TOLERANCE ETC
	SOCKET WELD & THREADED PIPE FITTINGS

TUBE FITTINGS DIMENSION

TUBE FITTINGS (INCHES)

Curernt Views

	EQUAL UNION BULKHEAD
	45 DEGREE ELBOW
	3 PIECE UNION
	BACK UP FLANGE
	3 WAY BALL VALVE
	AIR HEADER
	A2 TYPE CABLE GLAND
	HEX UNION
	4 WIRE SPIRAL FERRULE
	3 Piece Union
	TEE BULKHEAD

Product

	HEX UNION
	JIC fittings are 37 deg. seat fitting primarily used on hose ends.It is used for low pressue and is used where ferrule fittings is not possible to install.The seats in JIC fittings are larger than the seats in pipe swivel fittings. MATERIAL:Stainless Steel,Brass,Inconel and Carbon Steel. MADE: BARSTOCK AND FORGED. SIZE: 1/8inch to 1inch.

	45 DEGREE ELBOW
	JIC fittings are 37 deg. seat fitting primarily used on hose ends.It is used for low pressue and is used where ferrule fittings is not possible to install.The seats in JIC fittings are larger than the seats in pipe swivel fittings. MATERIAL:Stainless Steel,Brass,Inconel and Carbon Steel. MADE: BARSTOCK AND FORGED. SIZE: 1/8inch to 1inch.

	45 DEGREE ELBOW FEMALE
	JIC fittings are 37 deg. seat fitting primarily used on hose ends.It is used for low pressue and is used where ferrule fittings is not possible to install.The seats in JIC fittings are larger than the seats in pipe swivel fittings. MATERIAL:Stainless Steel,Brass,Inconel and Carbon Steel. MADE: BARSTOCK AND FORGED. SIZE: 1/8inch to 1inch.

	90 DEGREE ELBOW EXTRA LONG
	JIC fittings are 37 deg. seat fitting primarily used on hose ends.It is used for low pressue and is used where ferrule fittings is not possible to install.The seats in JIC fittings are larger than the seats in pipe swivel fittings. MATERIAL:Stainless Steel,Brass,Inconel and Carbon Steel. MADE: BARSTOCK AND FORGED. SIZE: 1/8inch to 1inch.

	90 DEGREE ELBOW MALE
	JIC fittings are 37 deg. seat fitting primarily used on hose ends.It is used for low pressue and is used where ferrule fittings is not possible to install.The seats in JIC fittings are larger than the seats in pipe swivel fittings. MATERIAL:Stainless Steel,Brass,Inconel and Carbon Steel. MADE: BARSTOCK AND FORGED. SIZE: 1/8inch to 1inch

	90 DEGREE ELBOW MALE
	JIC fittings are 37 deg. seat fitting primarily used on hose ends.It is used for low pressue and is used where ferrule fittings is not possible to install.The seats in JIC fittings are larger than the seats in pipe swivel fittings. MATERIAL:Stainless Steel,Brass,Inconel and Carbon Steel. MADE: BARSTOCK AND FORGED. SIZE: 1/8inch to 1inch.

	90 DEGREE ELBOW MALE
	JIC fittings are 37 deg. seat fitting primarily used on hose ends.It is used for low pressue and is used where ferrule fittings is not possible to install.The seats in JIC fittings are larger than the seats in pipe swivel fittings. MATERIAL:Stainless Steel,Brass,Inconel and Carbon Steel. MADE: BARSTOCK AND FORGED. SIZE: 1/8inch to 1inch.

	90 DEGREE ELBOW MALE LONG
	JIC fittings are 37 deg. seat fitting primarily used on hose ends.It is used for low pressue and is used where ferrule fittings is not possible to install.The seats in JIC fittings are larger than the seats in pipe swivel fittings. MATERIAL:Stainless Steel,Brass,Inconel and Carbon Steel. MADE: BARSTOCK AND FORGED. SIZE: 1/8inch to 1inch.

	90 DEGREE ELBOW MALE SWIVEL
	JIC fittings are 37 deg. seat fitting primarily used on hose ends.It is used for low pressue and is used where ferrule fittings is not possible to install.The seats in JIC fittings are larger than the seats in pipe swivel fittings. MATERIAL:Stainless Steel,Brass,Inconel and Carbon Steel. MADE: BARSTOCK AND FORGED. SIZE: 1/8inch to 1inch.

	90 DEGREE ELBOW UNION
	JIC fittings are 37 deg. seat fitting primarily used on hose ends.It is used for low pressue and is used where ferrule fittings is not possible to install.The seats in JIC fittings are larger than the seats in pipe swivel fittings. MATERIAL:Stainless Steel,Brass,Inconel and Carbon Steel. MADE: BARSTOCK AND FORGED. SIZE: 1/8inch to 1inch

	ADAPTOR
	JIC fittings are 37 deg. seat fitting primarily used on hose ends.It is used for low pressue and is used where ferrule fittings is not possible to install.The seats in JIC fittings are larger than the seats in pipe swivel fittings. MATERIAL:Stainless Steel,Brass,Inconel and Carbon Steel. MADE: BARSTOCK AND FORGED. SIZE: 1/8inch to 1inch.

	BULKHEAD MALE
	JIC fittings are 37 deg. seat fitting primarily used on hose ends.It is used for low pressue and is used where ferrule fittings is not possible to install.The seats in JIC fittings are larger than the seats in pipe swivel fittings. MATERIAL:Stainless Steel,Brass,Inconel and Carbon Steel. MADE: BARSTOCK AND FORGED. SIZE: 1/8inch to 1inch

	BULKHEAD MALE - FEMALE
	JIC fittings are 37 deg. seat fitting primarily used on hose ends.It is used for low pressue and is used where ferrule fittings is not possible to install.The seats in JIC fittings are larger than the seats in pipe swivel fittings. MATERIAL:Stainless Steel,Brass,Inconel and Carbon Steel. MADE: BARSTOCK AND FORGED. SIZE: 1/8inch to 1inch.

	CAP
	JIC fittings are 37 deg. seat fitting primarily used on hose ends.It is used for low pressue and is used where ferrule fittings is not possible to install.The seats in JIC fittings are larger than the seats in pipe swivel fittings. MATERIAL:Stainless Steel,Brass,Inconel and Carbon Steel. MADE: BARSTOCK AND FORGED. SIZE: 1/8inch to 1inch.

	CHECK NUT
	JIC fittings are 37 deg. seat fitting primarily used on hose ends.It is used for low pressue and is used where ferrule fittings is not possible to install.The seats in JIC fittings are larger than the seats in pipe swivel fittings. MATERIAL:Stainless Steel,Brass,Inconel and Carbon Steel. MADE: BARSTOCK AND FORGED. SIZE: 1/8inch to 1inch.

	CONNECTOR FEMALE
	JIC fittings are 37 deg. seat fitting primarily used on hose ends.It is used for low pressue and is used where ferrule fittings is not possible to install.The seats in JIC fittings are larger than the seats in pipe swivel fittings. MATERIAL:Stainless Steel,Brass,Inconel and Carbon Steel. MADE: BARSTOCK AND FORGED. SIZE: 1/8inch to 1inch.

	CONNECTOR MALE
	JIC fittings are 37 deg. seat fitting primarily used on hose ends.It is used for low pressue and is used where ferrule fittings is not possible to install.The seats in JIC fittings are larger than the seats in pipe swivel fittings. MATERIAL:Stainless Steel,Brass,Inconel and Carbon Steel. MADE: BARSTOCK AND FORGED. SIZE: 1/8inch to 1inch.

	CONNECTOR MALE LONG
	JIC fittings are 37 deg. seat fitting primarily used on hose ends.It is used for low pressue and is used where ferrule fittings is not possible to install.The seats in JIC fittings are larger than the seats in pipe swivel fittings. MATERIAL:Stainless Steel,Brass,Inconel and Carbon Steel. MADE: BARSTOCK AND FORGED. SIZE: 1/8inch to 1inch.

	CROSS TUBE
	JIC fittings are 37 deg. seat fitting primarily used on hose ends.It is used for low pressue and is used where ferrule fittings is not possible to install.The seats in JIC fittings are larger than the seats in pipe swivel fittings. MATERIAL:Stainless Steel,Brass,Inconel and Carbon Steel. MADE: BARSTOCK AND FORGED. SIZE: 1/8inch to 1inch

	CROSS WITH 2 SIDE FEMALE x 2 SIDE FLARE

	CROSS WITH 2 SIDE MALE x 2 SIDE FLARE

	CROSS WITH 3 SIDE MALE x 1 SIDE FLARE
	JIC fittings are 37 deg. seat fitting primarily used on hose ends.It is used for low pressue and is used where ferrule fittings is not possible to install.The seats in JIC fittings are larger than the seats in pipe swivel fittings. MATERIAL:Stainless Steel,Brass,Inconel and Carbon Steel. MADE: BARSTOCK AND FORGED. SIZE: 1/8inch to 1inch.

	CROSS WITH 3 SIDE FEMALE x 1 SIDE FLARE

	CROSS WITH 3 SIDE FLARE x 1 SIDE FEMALE
	JIC fittings are 37 deg. seat fitting primarily used on hose ends.It is used for low pressue and is used where ferrule fittings is not possible to install.The seats in JIC fittings are larger than the seats in pipe swivel fittings. MATERIAL:Stainless Steel,Brass,Inconel and Carbon Steel. MADE: BARSTOCK AND FORGED. SIZE: 1/8inch to 1inch.

	CROSS WITH 3 SIDE FLARE x 1 SIDE MALE
	JIC fittings are 37 deg. seat fitting primarily used on hose ends.It is used for low pressue and is used where ferrule fittings is not possible to install.The seats in JIC fittings are larger than the seats in pipe swivel fittings. MATERIAL:Stainless Steel,Brass,Inconel and Carbon Steel. MADE: BARSTOCK AND FORGED. SIZE: 1/8inch to 1inch.

Untitled Document